Overview
IOMod HT is a stand-alone Modbus (RTU), IEC 60870-5-103 and IEC 60870-5-101 wall-mounted temperature and humidity sensor device. Designed to measure indoor room or cabinet temperature and humidity with high accuracy, IOMod HT can be used for numerous applications where a user requires temperature and humidity monitoring. IOMod HT also can be used as thermostat that controls relay outputs according to user configuration on humidity and temperature limits.
IOMod HT is an ideal solution for such applications as data acquisition, observation, control, process monitoring, testing and remote measurement. It is controlled over Modbus RTU, IEC 60870-5-103 or IEC 60870-5-101 protocol, and can be connected in parallel with other Modbus RTU, IEC 60870-5-103 or IEC 60870-5-101 equipment in a multi-drop installation scheme as in any SCADA system or monitoring platform.
When using IOMod HT with WCC Lite gateway it is possible to monitor temperature, humidity, relay status, also control relays and their settings over Ethernet LAN’s or 3G/4G(LTE)/GSM/GPRS networks. It is a powerful solution for remote monitoring and control, alarm management and data logging of I/O’s on CloudIndustries.eu cloud platform.
Features
- Temperature measurement in 0.1°C resolution
- Humidity measurement in 0.1% resolution
- Modbus, IEC-60870-5-103 and IEC-60870-5-101 communication over RS485
- 2 normally open relay outputs (advanced version)
- Automatically configurable relay switching on temperature or humidity change
- Configuration over USB console
- Drag and Drop firmware upgrade over USB mass storage
- LED indication for input/output and data transmission
- Spring contact connectors
- Easy connection with WCC Lite gateway and CloudIndustries.eu platform
System
- Relay outputs: 0 (Basic), 2 (Advanced)
- PC USB connection: Mini USB
- Output connectors: Spring contact connectors
Communication
- Communication standard: RS485
- Communication protocol: Modbus (RTU), IEC-60870-5-103, and IEC 60870-5-101
- Speed: 600 – 115200 baud
Electrical characteristics
- Termination resistor: Software selectable, 120Ω
- Power supply:
- Nominal: 12-24VDC, 8mA (basic), 24VDC, 25mA (advanced)
- Full range: 5-33VDC (basic), 18-27VDC (advanced)
- Relays: 2 (normally open, advanced)
Relay Output Characteristics (Advanced):
- Resistive load (cosϕ=1): 5 A at 250 VAC, 5 A at 30 VDC
- Inductive load (cosϕ=0.4, L/R=7ms): 2 A at 250 VAC, 2 A at 30 VDC
- Max. switching power: 1,250 VA, 150 W
Specifications
| Device data | |
| Article number | IOMOD-HT (basic and advanced) |
| Product Description | Wall-mounted temperature and humidity sensor device |
| Configuration software | IOMOD Utility, Serial console (putty)* |
| Warranty | 2 years |
| Measurement values and functions | |
| Temperature measurement range | +5 .. +60°C |
| Temperature measurement resolution | 0.1°C |
| Humidity measurement range | 20 .. 80%RH; |
| Humidity measurement resolution | 0.1% |
| Accuracy | 0.5°C accuracy for all operating conditions |
| Interface and communication | |
| RS485 interface | ANSI/TIA/EIA-485-A-1998 |
| Communication protocols | – Modbus RTU Slave; – IEC 60870-5-101 Slave; – IEC 60870-5-103 Slave. |
| Baudrate | 600 – 115200 |
| Parity | None, Even, Odd |
| Terminating resistors | 120 Ohm (configurable) |
| USB interface | |
| Type | Mini USB |
| Use | Configuration/Firmware upgrade |
| Relay outputs (in advanced version only) | 2 SPNO |
| Max. switching power | 1,250 VA, 150 W |
| Resistive load (cosφ=1) | 5 A at 250 VAC, 5 A at 30 VDC |
| Inductive load (cosφ=0.4, L/R=7ms) | 2 A at 250 VAC, 2 A at 30 VDC |
| Power supply | |
| Auxiliary power supply | 5-33VDC (full range in basic version) 18-27VDC (full range in advanced version) |
| Power consumption | 16mA @ 12VDC, 8mA @ 24 VDC (basic version) 50mA @ 12VDC, 25mA @ 24 VDC (advanced version) |
| Insulation voltage | 3 kV |
| Operating conditions | |
| Operating temperature | -40°C … 85°C |
| Storage temperature | -40°C … 85°C |
| Relative humidity | max. 95 % (non condensing) |
| Protection class | IP20 |
| Dimensions and installation instructions | |
| Case height x width x depth | 26 x 71 x 71 mm |
| Installation type | Wall mounting |
Documentation
- Online documentation about IOMOD modules
- Brochures and Manuals to download
- Firmware and tools
- ISO downloads
Order
IOMOD-HT – Wall-mounted temperature and humidity sensor module with IEC 60870-5-103, IEC 60870-5-101, or Modbus RTU Slave protocol
IOMOD-HT-ADVANCED – Wall-mounted temperature and humidity sensor module with 2 relay outputs with IEC 60870-5-103, IEC 60870-5-101, or Modbus RTU Slave protocol
On request*:
* – IOMOD devices 8DI8DO, 8AI, 4RTD, 16DI, 8DI4RO, HT with firmware versions v1.x supports only 1 protocol. To change protocol is required to change firmware. All types of firmware are accessible to all customers without any additional payment.